corner bookmark demo

1. cut a strip of card stock (or find a scrap, if you have one ;) that's 1 3/8" x 6"	2. stamp or decorate the center 3 to 4 inches
3. Turn paper face down and fold the right side at a 90 degree angle in the center. Creasing the edge.	4. Do the same thing with the left side - making center seam as close and smooth as possible
5. Apply a small piece of scotch tape to hold fold together.	6. Align the folded part across the top of your paper trimmer and cut just where the fold begins
7. Turn paper 1/4 turn and trim again. Note, that the fold is now on the bottom.	8. Attach this square to the center of a giga square scallop punch out, or cut out a square to fit.
9. This step is optional (unless you're a little OCD, like myself and need to cover the center seam ;) Cut a coordinating square of card stock 1 7/8" x 1 7/8" and after checking to see if any trimming is necessary, attach it under the triangle pocket	10. Sit back and admire a job well done! These are so quick, I popped out all 4 of these in about 45 minutes.